0141 881 8101
? TRS Ltd. 2012 All Trademarks Recognised Terms And Conditions
The time can be set by the PC Software ATT-TAMS when the clock is showing connected in the software right mouse click and select Sync Time this will set the time and date to that of the PC.
The time can be set in the menu of the clock press the menu button on the clock keypad and Select Date and time from the menu system. Use the clocks keypad to enter the new time.
There are 2 resets on the clocking in machine a 'Hard' and 'Soft' the 'Hard' reset is a button on the side of the clock you will need a paper clip or something long and thin the reset hole is located by the USB port on the left hand side insert the paper clip and the clock should reset. This will not loose any data just reset some of the parameters. The soft reset is in the menu system under 'Options' or 'System' (depending on clock).
The best method we have found is using a wet wipe (baby wipe) and a dry cloth.
This may be due to the power save mode being set. In the menu of the clock go to System and Misc. Set. Adjust the sleep time to '0' this will keep the display on.
Yes the iClock has a built in Auto test facility in the menu system select Auto Test. In this menu you can select All tests or individual tests.
Make sure you install the ATT-TAMS software first as this will install the USB driver for the clock. Once installed plug the clock into a USB port and you should see the clock appear as FP reader within windows.
We have had a software update to change the message box text. Click here to download new file to fix this problem.
Download the latest PDF and Information sheets.
Software Downloads and Updates